Washing Machine Won’t Spin? We’ve Got You Covered. Don’t be tense if your washer’s spin cycle repeatedly stops while you’re attempting to dry wet clothes. We can help. Experts have used every major appliance, including washing machines, and can help you quickly. Washing machines frequently stop spinning for no valid reason. This could be caused by a variety of machine-related issues. The majority of which Repair Aid can quickly and affordably resolve. Washing machine repair service in Pune will assist you in many ways, the best experts allow you to give the perfect solution for your appliances.

How can I get my washing machine to spin again?

Here are a few common causes of a washing machine not spinning. These are:

  • There is an excessive amount of laundry in the washer.
  • The burden is unevenly distributed.
  • The washer itself is unbalanced.
  • There is a broken lid switch.
  • The engine is beyond repair.
  • The belt has been shattered.

We’ll go over each of these issues in greater depth. First, determine whether your washing machine can spin at all or if it stops mid-cycle. To check if the drum is spinning, open the lid of the washer during the spin cycle (for top-load machines) or listen and feel the washer’s exterior. Make sure there is no laundry in the machine while performing this inspection.

When there are issues with the spin cycle, washers frequently fail to complete the drain cycle. If your washing machine won’t spin or drain, the same troubleshooting techniques should apply. While finding the better solution for your appliances you need to first identify the problem. Here are the causes of a washer not spinning properly.


When your washing machine is overloaded, it may fill but not spin. Many washers lack automatic detectors that can alert you if the machine is overfilled. Typically, the machine will not detect a problem until the washer is completely full of water. If that’s the case, your only option is to remove some of the wet clothing.


If you’re only washing a few heavy items, your washing machine may not spin or may spin inefficiently. This is common when washing items such as a comforter or shoes. If you balance the load by opening the machine and moving the objects around, your washer will spin more efficiently. As long as you don’t overload the machine, adding more items to a load can help balance it.


If your washing machine isn’t balanced, it will likely vibrate and make a lot of noise during the spin cycle, so you’ll know. An uneven surface can cause problems with all types of washers. Because it allows the machine to rock and slide while agitating.

One of the first things you should look for if your front-loading washer won’t spin. Is whether it can detect when it isn’t properly balanced and stops spinning as a safety precaution. In general, you can correct an unbalanced washing machine by adjusting the washer legs. Using a level, ensure that it is done correctly.


The lid switch checks to see if the lid is properly closed and, as a precaution, stops your washer from spinning. Some models will allow the washer to fill but not spin. But the majority of models will not spin at all if the lid switch is not working.

A malfunctioning lid switch is one of the most common causes of a top-loading washer not spinning. Which you should investigate right away, especially if your problem is a top-loading washer that fills and agitates but does not spin properly. The switch may need to be replaced, or it may be possible to bend it back into shape. Because there are numerous steps and it is critical that you use the correct replacement part, we recommend consulting a Washing machine repair service in Pune for assistance.

There is inadequate drainage.

Normally, your washing machine’s spin cycle will not begin until the water has been removed. The drainage hose may become kinked or clogged as a result of debris from your clothing. If the hose is crushed or kinked, it will most likely need to be replaced. If it’s clogged, you can clean it in several ways:

First, unplug the washing machine.

Because the hose is normally located near the back of the washer, pull it away from the wall to gain access to it.

Before disconnecting the drain line from the back, keep a bucket nearby to catch any water that may be leaking. Disconnect the hose’s other end from the pipe into which it drains.

You can now insert a wire hanger into the hose and remove anything that is obstructing it. When you’re finished, reconnect the washer’s hose.


It’s possible that the drive motor in your washing machine burned out, preventing the spin cycle from functioning properly. If the drive motor fails, your washing machine may have problems spinning in the middle of the cycle, even if it fills and agitates normally. If you believe the drive motor needs to be replaced, contact a local Washing machine repair service specialist for assistance because this is a complicated repair.


If the drive belt is broken or comes off of its wheel, the washer may still agitate and make noise. Before inspecting the drive belt, unplug your washing machine. Then, remove the washer’s back to ensure that the belt is still attached to the pulley system. If the belt has come off, you may be able to fix the problem by reinstalling it. If the old belt appears to be damaged or worn, you’ll need to buy and install a new one.

But, Before We Go, a Word of Caution

Some repairs are best left to the professionals. If the shock absorber is then improperly reconnected, it can cause a whole new set of problems, forcing you to divert your savings plan toward purchasing a brand-new washer. As a result, even if you think you can handle more tasks than you think, stick to your strengths or, if necessary, enlist the help of a friend.

Avoid endangering yourself and your appliance by attempting a difficult repair yourself, as washing machines can be quite complicated. If you’ve exhausted all of our suggestions and still can’t figure out why your washer isn’t spinning, contact a Washing machine repair service.

Prepare for washing machine maintenance.

If these troubleshooting techniques fail to resolve the problem, it could be due to a broken water pump or drive belt. These components must be professionally repaired or replaced in order for your system to function properly again.

Leave washing machine repair to the professionals. If the washing machine still won’t drain, contact Bharat Services. Their skilled technicians can quickly and effectively restore your washing machine to working order.

Although troubleshooting a problem like this can be unpleasant at times, it is extremely satisfying to know that you have successfully resolved the issue while also saving money. If you are unable to repair your washing machine, you can easily obtain help from an expert and hire a qualified professional.


Please enter your comment!
Please enter your name here